Services Performed
- RACK VEH AND INSPECT, FOUND RIGHT LOWER CONTROL ARM AND CAMBER ARM BENT, REAR SUBFRAME LOOKS FINE. REC LOWER ARM AND CAMBER ARM FIRST THEN TAKE READINGS
- CAN NOT CORRECT FRONT CAMBER, LOOSENED STRUTS AND PUSHED LEFT FRONT END PULLED LEFT FRONT OUT. LEFT FRONT WILL GO FROM -2.3 TO -3.0 LF WILL GO FROM -3.8 TO -4.3 TRIED TO SEE IF CRADLE WOULD MOVE AND NO LUCK. MAY NEED BODY SHOP TO PULL SUBFRAME FROM LEFT SIDE TO RIGHT TO CENTER THEN GET READINGS TO SEE IF CAMBER IS EVEN AND POSS SHIFT SUBFRAME FORWARD FOR HIGHER CASTER
- REMOVE AND REPLACE RIGHT REAR CAMBER ARM AND LOWER CONTROL ARM
JASON L. gave our service a 5 star review on 9/14/2022